Battery Element Testers Guidelines

Battery element testers are useful for checking the assembly level insulation damages in lead acid batteries along with defective and omitted separators. Spotting these types of faults well before charging and occupying the battery reduces the expensive renewals to a large extent. These faults were detected using the classical tests of AC electric; however this method creates harmful heat in the applications of wet cell. To eliminate this condition, modern battery element testers have been introduced that functions with a heavy voltage and in a short time interval to enhance the stress passing into the dielectric item and to reduce the median energy level at the same time. The main aim of this tester is to offer enough amount of stress to produce the flow of current even during the failure situations. This method is suitable for spotting the faults appropriately along with reducing the risks that may be produced because of overheating along with a AC test at the same time.

A test voltage with an adjustable facility will be present in almost all the testers. This test voltage will have a high output volt of about three thousand consisting of broad varieties of separator distances and kinds. The solid state switching facility with a long life time and a heavy voltage provides dependability for the applications that consist of a large amount of volume. Digital meters are also present in these testers through which the readouts can be read in a very simple way with the received voltage level and a high quality. These testers are very easy to fix and its functioning will begin immediately after installation. The test voltage is provided to the testers with the security probes that are already fixed in the testers. During a failure situation, the heavy voltage will be shut down and both the alarms including the audio and the video will be sending signals to the operator about the failure.

Battery element testers are manufactured in such a way that it can function rapidly and spot the faults with a high accuracy level on the production lines of large quantity. The probes are very secure, simple to use and are highly efficient for providing large amount of voltages. During the failure of the product, the lockout facility switches off the large voltage. The real output of the heavy voltage can be seen through the digital voltmeter. These testers consist of a meter with a digital quality for showing the battery reading during test situations. The desired level of the voltage can be chosen using the voltage control knob.

Some of the models of these testers include Model 1652, Model 1653 etc. Model no 1652 has an input voltage of about 115 volts and an output voltage of about 400-3000 Volts DC. Its measurements are 16*5*13.5 inches and its shipping weight is about 28 lbs. Its terminations include two heavy voltage sockets. The optimal level of acceptable cell res. usually ranges from hundred to two hundred and fifty ohms. Model No: 1653 has an input voltage of about two hundred and twenty volts and an output voltage of about 400 to 3000 volts DC peak. Its output voltage level and the optimum level of acceptable cell res. are the same. The termination of this model is 100 or 250 ohms. Its shipping weight is about twenty nine pounds.